| Derbyshire Archaeological Society - 1891 - 1326 pagina’s
...warp. In the high warp looms this warp is arranged on a vertical plane, and rolled round the cylinders [one at the top and the other at the bottom of the upright frame, and about five or six feet apart]. It is composed of worsted, cotton, or even silk threads... | |
| 1885 - 860 pagina’s
...impressions. They are true as far as they go and no further. If of two mendicants, who meet a pedestrian, one at the top and the other at the bottom of the street, the former receives sixpence and the latter nothing, the estimates which they each form of... | |
| 1965 - 934 pagina’s
...method liquid, usually water or brine, is injected through at least two separately metered systems, one at the top and the other at the bottom of the zone of interest. The interface between them can be determined by tagging one or the other, by introducing... | |
| Institute of Physics and the Physical Society - 1884 - 882 pagina’s
...the metals stand in nearly the same order in both, and that iron and nickel are very conspicuous, the one at the top and the other at the bottom of the lists. The last-named metal is especially worthy of notice, because in it longitudinal traction, when... | |
| Joseph Needham, Dieter Kuhn - 1988 - 560 pagina’s
...under one staff only ask for what is a practical impossibility, but here we read about two staffs, one at the top and the other at the bottom of the roller-frame; winding over and under would therefore be possible in such a case. How was the winding... | |
| Edwin Sachs - 1980 - 434 pagina’s
...For the first phase described, the single-handed pass (Fig. 28, &c.) is perfect. Two aces are placed, one at the top and the other at the bottom of the pact, and as the performer turns to the holder of the two others, he executes the pass, leaving the... | |
| Brian Morton - 1985 - 168 pagina’s
...slope were each considered separately as a zone. Two horizontal transects were made at transect B, one at the top and the other at the bottom of the reef slope. The reef profile was determined by measuring the depth of the sea floor at every metre... | |
| Charles S. Peirce - 1982 - 792 pagina’s
...made must be extremely constant. Should this not be the case, the temperature of two thermometers — one at the top, and the other at the bottom of the pendulum — would not indicate the temperature of the pendulum itself, which requires a long time... | |
| S. K. Malik, S. S. Shah - 1994 - 746 pagina’s
...grain boundaries are present at the flat steps in contrast to sharp steps where two grain boundaries, one at the top and the other at the bottom of the step, are present. YBCO Sr Ti 03 (b) Fig. 3. (a) Schematic representation of CuO planes for edge with... | |
| Diane P. Wormsley, Frances Mary D'Andrea - 350 pagina’s
...results. Through the use of a specially constructed wheel displaying two stimulus Snellen Illiterate E's, one at the top and the other at the bottom of the wheel, and a table containing a response mechanism, Macht not only devised a way to evoke responses... | |
| |